A Guide to Resetting Your Electric Water Heater

If you find your electric water heater not working someday, it may be because it now needs resetting. In this post, we will discuss the steps for resetting your water heater.

Sometimes the easiest way to fix an issue is by clicking on the electric water heater reset button. You can do this by turning off your heater and finding the thermostat reset button on the unit. This will turn off your water heater and reset it to work correctly again.

Hot water tank

Steps to Reset Electric water heater

Safety first

Turn off the electric water heater and ensure it has cooled down before proceeding. Don’t touch the unit until it has cooled down.

Locate the thermostat reset button 

Locate the thermostat reset button on your electric water heater. The location of this button can vary from one model to another, but it will usually be placed on the lower front part of the unit. A small button can sometimes be labeled as “reset” or “clear.”

If you cannot locate a reset button, contact your local plumbing company for assistance locating this device and for help with resetting an electric water heater.

Press the button.

Press the button until you hear a metallic click. This can take 2-3 seconds. The electric water heater will reset itself and start working again.

Woman resetting the electric hot water heater

Turn the reset button back to its original position, and then turn on your heater.

Once you’ve turned the reset button back to its original position, turn on your heater. Check to see if your water is heating properly. If it isn’t, do a quick check to ensure that all electrical connections are correctly set up and that there aren’t any wires or cables in the way.

Check to see if your water is heating properly 

Check to see if your water is heating correctly and if it isn’t, do a quick check to ensure that all electrical connections are properly set up and that there aren’t any wires or cables in the way.

  • The power cord should be connected to the outlet. If not, plug it in.
  • The circuit breaker or fuse box should be turned on. If not, turn them on using a screwdriver or an electrician’s tool kit.
  • There should also be no loose connections between any part of your plumbing systems, such as pipes, faucets, and valves because they could cause problems when you try turning back on your water heater.

Still not working

If your heater is still not working properly, taking help from professionals is the only way out. You can call any electrician to know what happened and resolve it without wasting further time. 

Professional resetting the electric hot water heater

Conclusion

If your heater is not working after clicking on the electric water heater reset button, then it’s possible that the thermostat needs replacing or there is a problem with the wiring. Check the thermostat before calling an electrician if your water heater isn’t heating up. If this doesn’t solve the problem, consider hiring a professional to diagnose and fix other issues related to your unit’s functionality.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.