A toilet seat is a must in every bathroom. It not only gives you a place to sit comfortably, but it also keeps the toilet tidy and hygienic. However, with time, toilet seats can get worn down or harmed, resulting in leaks, stains, and other problems. Fortunately, changing a toilet seat is a reasonably easy and affordable chore that most homeowners can do with simple tools. In this post, you will learn how to replace a toilet seat.
- A new toilet seat.
- A screwdriver.
- An adjustable wrench.
- A plunger.
- A putty knife (optional).
Taking Out the Previous Toilet Seat
You must remove the old toilet seat before installing the new one. Start by turning the valve behind the toilet anticlockwise to switch off the water supply. To get rid of as much water as you can from the tank and bowl, flush the toilet next.
The screws holding the old toilet seat in place can be removed with a screwdriver. Usually, the hinges and back of the seat are where you’ll find these screws. Lift the old seat off the toilet bowl with care after the screws have been removed. If the seat is stuck, you can unfasten the hinge nut screws with an adjustable wrench.
Ensure the Bowl and Surrounding Area Is Clean
There might be some buildup or residue at the mounting holes if the previous seat has been there for a long. For the new seat to fit properly, thoroughly clean this region with a putty knife or cleaning solution.
How to Install a New Toilet Seat
You can install the new toilet seat once the old one has been taken out and the area has been thoroughly cleaned. Sourcing toilet seat spares by plumb2u.com, place the new seat over the mounting holes on the toilet bowl to start. Make sure the seat is level, and the hinges are correctly positioned.
The screws that arrived with the new seat should be inserted through the hinges and mounting holes. Securely tighten the screws but take care not to overtighten them because this could shatter the toilet bowl.
Restarting the water supply will allow you to check for leaks by repeatedly flushing the toilet. You’re done if everything is secure and there are no leaks.
Before purchasing a new seat, measure the toilet bowl to ensure you obtain the correct size.
Replace the toilet seat every 5 to 10 years, preferably more frequently if the toilet bowl is damaged. If the toilet is cracked, it is advisable to replace the entire toilet, rather than just the seat.
In conclusion, changing a toilet seat is a simple chore that most homeowners can complete with the correct tools and a little knowledge. Adhering to these straightforward procedures, you may quickly experience a brand-new, spotless, and comfy toilet seat. As you remove the old seat, clean the mounting area, and install the new seat, remember to turn off the water supply. Your toilet seat can last for many years if you take a little time to care for it.