Every piece of jewelry in your wedding set is unique and requires different types of care depending on the metal and stones used. Diamonds are the most high maintenance, whether on a proposal ring or an heirloom diamond pendant from your grandmother.
It is necessary to remember that diamonds can tolerate abrasive treatment, but the metals used to fit them cannot. So, be gentle regardless of the metal and the types of diamond used in your jewelry.
Tips to Maintain and Clean Your Diamond Jewelry
Diamonds are natural magnets for grease, even the oil on human fingertips can dull its sparkle. Therefore, their shine is hard to maintain.
We have got a list of home remedies and methods that you can use to clean your wedding ring safely. But first, you must make sure the stone is in place.
You might not want it to slip while cleaning. Secondly, examine the ring because most of them have intricate designs where the dirt sits. So you would have to soak it for a good thirty minutes before beginning the process.
1. Water and Liquid Soap
Regardless of the wedding ring’s shape or metal type, soap and plain water is the best way to clean a diamond ornament. Begin with a few drops of liquid soap or dishwashing liquid in the bowl.
Then, add lukewarm water and agitate to form a good lather. Let the ring sit at the bottom for twenty to thirty minutes before you start to brush it. If you use a transparent bowl, you might even be able to see the dregs of dirt.
Rinse the jewelry under warm running water, and use a soft wipe to clean it afterward.
Liquid soap or dishwashing liquid are so helpful because they are non-toxic and can remove grease and dirt without harming the gem. Do not forget to use a brush with soft bristles, or you might end up with a ring duller than before.
Moreover, avoid using chemicals like chlorine because they can damage your ring or any other jewelry with the diamond studs.
2. Non-Abrasive Ornament Cleaner
It is good to invest in a commercial jewelry cleaner. But, always remember to carry out enough research before finally landing on one. You might want to avoid purchasing ones with abrasive chemicals. The chemical solutions lead to discoloration, and your precious wedding jewelry might lose its durability. You do not want that, do you?
Use a soft brush or a polishing cloth to apply the paste and scrub it gently. Every cleaner has its properties and requirements concerning the methods of application. So, read the instructions on the packaging carefully before beginning the process.
3. Hydrogen Peroxide Solution
Take a small bowl and create a solution with equal parts of hydrogen peroxide and a glass cleaner, preferably Windex. Dip the ring or your earring studs, and let them soak for fifteen to twenty minutes.
Then, clean your ornaments with a soft brush and scrub with your fingers. Rinse the residue under running lukewarm water and dry it using wipes.
The hydrogen peroxide will help destroy the bacteria on the metal surface. And the Windex will erase all the dirt and day-to-day residue that builds upon it.
4. Tomato Ketchup
Strange as it sounds, tomato ketchup saves the day. When it comes to a tarnished silver and diamond wedding band, ketchup might be your go-to ingredient to bring back its shine.
Take a small bowl of ketchup and dip your ring in it. Use a soft toothbrush or a cotton bud to work the ketchup into the crevices and let it sit inside for a few minutes.
Do not delay it more than just a few minutes. Take the ring out. Scrub it gently with your fingertips. Rinse it under running warm water and dry it using a soft cloth afterward.
It is better to repeat the process now and then to prevent the jewelry from tarnishing further.
5. Vinegar and Baking Soda Mixture
Take a shallow bowl and pour a half cup of white vinegar. Then, add two to three tablespoons of baking soda and mix it well.
When the baking soda dissolves completely, dunk your jewelry in the solution and let it sit for a couple of hours. Scrub the ring if required and rinse it thoroughly with cold water.
You can dry it using a soft cloth afterward. Repeat the process frequently to prevent your diamond stud earrings from losing their sparkle.
How Often Should You Clean Your Diamond Jewelry?
You might realize it late that daily routine habits have led to dulling of shine in your ornaments. Therefore, it is better to have those things in mind to keep your diamond jewelry sound and shining.
For instance, hand creams, cooking oils, shampoos, hair styling products, and even perfumes are a nightmare when it comes to the life of your sets.
For this reason, avoid using any of these while having the jewelry on. Also, ensure to clean your pendants and bands once a week if you wear them every day.
No doubt that diamonds are the sturdiest element to exist on the planet. But, that does not mean you have to be harsh with them. The diamond wedding sets are expensive and ask for high maintenance.
So, you have to be careful with the brushes, cleaners, and even the wipes you use on them. By sticking to a proper hygiene and care regimen, you can have your wedding day diamonds last for generations.
You must have heard diamonds are your best friends and thought they would last forever. But, that is not the complete truth.
That priceless wedding or engagement ring does not only require you to keep it safe but clean also. You might want to keep ever sparkling because it probably has more sentimental value than any jewelry you possess.
They might use ultrasonic lasers and commercial steaming tools to clean your diamonds soundly.